home *** CD-ROM | disk | FTP | other *** search
- Path: peer-news.britain.eu.net!demon!alladin.demon.co.uk
- From: ajackson@alladin.demon.co.uk (Action Jackson)
- Newsgroups: comp.sys.amiga.hardware
- Subject: CyberVision FAQ
- Date: Sat, 03 Feb 1996 14:14:01 GMT
- Message-ID: <823357008.3378@alladin.demon.co.uk>
- NNTP-Posting-Host: alladin.demon.co.uk
- X-NNTP-Posting-Host: alladin.demon.co.uk
- X-Newsreader: Forte Free Agent 1.0.82
-
- I got my CV64. Installed it. But having problems
-
- With the CV64 in my machine the machine Hangs after a while (5 min
- max). Without it its OK.
- If I reboot the machine then still no joy. Trys to access the HD and
- then hangs (nothing on 1084 or Idek).
-
- I have the 1084 plugged into the Amiga 23pin port & Idek MF-8317 to
- the CV64.
- I have to enable JP1 (Slow buster) or else CV64 does not work at
- all... I do have Buster 11. I could not find any indication as to what
- A3640 ver it was (I thought I had 3.1 but cant be sure.)
-
- CV64 does work. I get the logo. And even can run the Emulation for a
- while but then it hangs (ususally on Disk Access when the pointer is
- busy).
-
- Some other Info:
-
- A4000/40
- KS 3.0 (39.106) WB 3.1
- 12 Mb Fast RAM (on motherboard)
- Z3 fastlane SCSI-II (z3scsi.device ver 5.997)
- Buster 11 (I confirment this, on a socket and says Buster 11).
- CyberVision 64 Rev 2.0.1 (says on the board) There is a sticker CE1996
- Cybergraphics 2.15
-
- PLEASE HELP!!!!
-
-